Skip to content

VPCs and Namespaces

VPC

A Virtual Private Cloud (VPC) is similar to a public cloud VPC. It provides an isolated private network with support for multiple subnets, each with user-defined VLANs and optional DHCP services.

apiVersion: vpc.githedgehog.com/v1beta1
kind: VPC
metadata:
  name: vpc-1
  namespace: default
spec:
  ipv4Namespace: default # Limits which subnets can the VPC use to guarantee non-overlapping IPv4 ranges
  vlanNamespace: default # Limits which Vlan Ids can the VPC use to guarantee non-overlapping VLANs

  defaultIsolated: true # Sets default behavior for the current VPC subnets to be isolated
  defaultRestricted: true # Sets default behavior for the current VPC subnets to be restricted

  subnets:
    default: # Each subnet is named, "default" subnet isn't required, but actively used by CLI
      dhcp:
        enable: true # On-demand DHCP server
        range: # Optionally, start/end range could be specified, otherwise all available IPs are used
          start: 10.10.1.10
          end: 10.10.1.99
        options: # Optional, additional DHCP options to enable for DHCP server, only available when enable is true
          pxeURL: tftp://10.10.10.99/bootfilename # PXEURL (optional) to identify the PXE server to use to boot hosts; HTTP query strings are not supported
          dnsServers: # (optional) configure DNS servers
            - 1.1.1.1
          timeServers: # (optional) configure Time (NTP) Servers
            - 1.1.1.1
          interfaceMTU: 1500 # (optional) configure the MTU (default is 9036); doesn't affect the actual MTU of the switch interfaces
      subnet: 10.10.1.0/24 # User-defined subnet from ipv4 namespace
      gateway: 10.10.1.1 # User-defined gateway (optional, default is .1)
      vlan: 1001 # User-defined VLAN from VLAN namespace
      isolated: true # Makes subnet isolated from other subnets within the VPC (doesn't affect VPC peering)
      restricted: true # Causes all hosts in the subnet to be isolated from each other

    thrird-party-dhcp: # Another subnet
      dhcp:
        relay: 10.99.0.100/24 # Use third-party DHCP server (DHCP relay configuration), access to it could be enabled using StaticExternal connection
      subnet: "10.10.2.0/24"
      vlan: 1002

    another-subnet: # Minimal configuration is just a name, subnet and VLAN
      subnet: 10.10.100.0/24
      vlan: 1100

  permit: # Defines which subnets of the current VPC can communicate to each other, applied on top of subnets "isolated" flag (doesn't affect VPC peering)
    - [subnet-1, subnet-2, subnet-3] # 1, 2 and 3 subnets can communicate to each other
    - [subnet-4, subnet-5] # Possible to define multiple lists

  staticRoutes: # Optional, static routes to be added to the VPC
    - prefix: 10.100.0.0/24 # Destination prefix
      nextHops: # Next hop IP addresses
        - 10.200.0.0

Isolated and restricted subnets, permit lists

Subnets can be isolated and restricted, with the ability to define permit lists to allow communication between specific isolated subnets. The permit list is applied on top of the isolated flag and doesn't affect VPC peering.

Isolated subnet means that the subnet has no connectivity with other subnets within the VPC, but it could still be allowed by permit lists.

Restricted subnet means that all hosts in the subnet are isolated from each other within the subnet.

A Permit list contains a list. Every element of the list is a set of subnets that can communicate with each other.

Third-party DHCP server configuration

In case you use a third-party DHCP server, by configuring spec.subnets.<subnet>.dhcp.relay, additional information is added to the DHCP packet forwarded to the DHCP server to make it possible to identify the VPC and subnet. This information is added under the RelayAgentInfo (option 82) in the DHCP packet. The relay sets two suboptions in the packet:

  • VirtualSubnetSelection (suboption 151) is populated with the VRF which uniquely identifies a VPC on the Hedgehog Fabric and will be in VrfV<VPC-name> format, for example VrfVvpc-1 for a VPC named vpc-1 in the Fabric API.
  • CircuitID (suboption 1) identifies the VLAN which, together with the VRF (VPC) name, maps to a specific VPC subnet.

VPCAttachment

A VPCAttachment represents a specific VPC subnet assignment to the Connection object which means a binding between an exact server port and a VPC. It basically leads to the VPC being available on the specific server port(s) on a subnet VLAN.

VPC could be attached to a switch that is part of the VLAN namespace used by the VPC.

apiVersion: vpc.githedgehog.com/v1beta1
kind: VPCAttachment
metadata:
  name: vpc-1-server-1--mclag--s5248-01--s5248-02
  namespace: default
spec:
  connection: server-1--mclag--s5248-01--s5248-02 # Connection name representing the server port(s)
  subnet: vpc-1/default # VPC subnet name
  nativeVLAN: true # (Optional) if true, the port will be configured as a native VLAN port (untagged)

VPCPeering

A VPCPeering enables VPC-to-VPC connectivity. There are two types of VPC peering:

  • Local: peering is implemented on the same switches where VPCs are attached
  • Remote: peering is implemented on the border/mixed leaves defined by the SwitchGroup object

VPC peering is only possible between VPCs attached to the same IPv4 namespace (see IPv4Namespace)

Local VPC peering

apiVersion: vpc.githedgehog.com/v1beta1
kind: VPCPeering
metadata:
  name: vpc-1--vpc-2
  namespace: default
spec:
  permit: # Defines a pair of VPCs to peer
  - vpc-1: {} # Meaning all subnets of two VPCs will be able to communicate with each other
    vpc-2: {} # See "Subnet filtering" for more advanced configuration

Remote VPC peering

apiVersion: vpc.githedgehog.com/v1beta1
kind: VPCPeering
metadata:
  name: vpc-1--vpc-2
  namespace: default
spec:
  permit:
  - vpc-1: {}
    vpc-2: {}
  remote: border # Indicates a switch group to implement the peering on

Subnet filtering

It's possible to specify which specific subnets of the peering VPCs could communicate to each other using the permit field.

apiVersion: vpc.githedgehog.com/v1beta1
kind: VPCPeering
metadata:
  name: vpc-1--vpc-2
  namespace: default
spec:
  permit: # subnet-1 and subnet-2 of vpc-1 could communicate to subnet-3 of vpc-2 as well as subnet-4 of vpc-2 could communicate to subnet-5 and subnet-6 of vpc-2
  - vpc-1:
      subnets: [subnet-1, subnet-2]
    vpc-2:
      subnets: [subnet-3]
  - vpc-1:
      subnets: [subnet-4]
    vpc-2:
      subnets: [subnet-5, subnet-6]

IPv4Namespace

An IPv4Namespace defines a set of (non-overlapping) IPv4 address ranges available for use by VPC subnets. Each VPC belongs to a specific IPv4 namespace. Therefore, its subnet prefixes must be from that IPv4 namespace.

apiVersion: vpc.githedgehog.com/v1beta1
kind: IPv4Namespace
metadata:
  name: default
  namespace: default
spec:
  subnets: # List of prefixes that VPCs can pick their subnets from
  - 10.10.0.0/16

VLANNamespace

A VLANNamespace defines a set of VLAN ranges available for attaching servers to switches. Each switch can belong to one or more disjoint VLANNamespaces.

apiVersion: wiring.githedgehog.com/v1beta1
kind: VLANNamespace
metadata:
  name: default
  namespace: default
spec:
  ranges: # List of VLAN ranges that VPCs can pick their subnet VLANs from
  - from: 1000
    to: 2999